Highly flexible, rapid-set, one-component, cementitious thin-bed adhesive, meeting C2 FT S2 requirements to DIN EN 12004, for trouble-free laying of large-format fully vitrified stoneware, natural stone and cast stone tiles. Stress-relieving effect of mortar matrix allows application to newly laid, unheated cement screeds (tiles with max. 60 cm edge length), wall and floor heating constructions, hollow floors and board subfloors. Achieves reduction in impact sound. Particularly suitable for rapid application on refurbishment contracts. Excellent workability and sag resistance. Also suitable for thin, ceramic MEGA formats exceeding 3 m² due to high crystalline water binding capacity. Suitable for use as special adhesive on a wide variety of deformation-sensitive substrates.

• For walls and floors, indoors
• C2: tensile adhesion strength ≥ 1.0 N/mm²
• F: early tensile adhesion strength ≥ 0.5 N/mm² after 6 hours
• T: thixotropic – high sag resistance due to fibre reinforcement
• S2: Deformability ≥ 5 mm
• Particularly suitable for large- and mega-format units
• Stress-relieving effect
• Particularly recommended for bonding Sopro insulation board and Sopro TEB 664 impact sound insulation and separating layer
• Working life: approx. 30 minutes
• Walkable and groutable: after approx. 3 hours
• Highly flexible
• High coverage (up to 30 % higher coverage than standard Sopro thin-bed adhesives)
• Low-chromate to Regulation (EC) No 1907/2006, Annex XVII