Silver-grey, highly flexible, sag-resistant, rapid-set, two-component, cementitious tile adhesive, meeting C2 FTE S2 requirements to DIN EN 12004. For wall and floor installation of stoneware, fully vitrified stoneware, natural stone and cast stone units. Stress-relieving effect of mortar matrix allows application to young concrete substrates and newly laid, unheated cement screeds (tiles with max. 60 cm edge length) and wall and floor heating constructions. Particularly suitable for outdoor use, e.g. on balconies and patios, and applications where adhesive system is subject to enhanced flexibility requirements. For facades, steps/stairways and swimming pools. Suitable for large-format units with edge length not exceeding 120 cm on walls, outdoors. Very high saponification resistance and flexibility. High, long-term frost resistance due to very low water absorption.

• For walls and floors, indoors and outdoors • C2: tensile adhesion strength ≥ 1.0 N/mm²
• F: early tensile adhesion strength > 0.5 N/mm² after 6 hours
• T: thixotropic – high sag resistance due to fibre reinforcement
• E: extended open time ≥ 30 minutes
• S2: Deformability ≥ 5 mm
• Silver-grey adhesive
• Working life: approx. 45 minutes
• Walkable and groutable: after approx. 3 hours
• Highly flexible
• Water-impermeable adhesive system
• For large- and mega-format units
• Particularly recommended for bonding Sopro insulation board and Sopro TEB 664 impact sound insulation and separating layer
• Meets quality requirements placed on bedding adhesive under Facade Ceramics guidance paper issued by SPV (Swiss Tiling Association)
• Low-chromate to Regulation (EC) No 1907/2006, Annex XVII