Highly flexible, one-component, cementitious thin-bed adhesive, meeting C2 TE S2 requirements to DIN EN 12004, for trouble-free laying of large-format fully vitrified stoneware, natural stone and cast stone tiles. Stress-relieving effect of mortar matrix allows application to newly laid, unheated cement screeds (tiles with max. 60 cm edge length), wall and floor heating constructions, hollow floors and board subfloors. Achieves reduction in impact sound. Excellent workability and sag resistance. Suitable for use as special adhesive on a wide variety of deformationsensitive substrates.

• For walls and floors, indoors
• C2: tensile adhesion strength ≥ 1.0 N/mm²
• T: thixotropic – high sag resistance due to fibre reinforcement
• E: extended open time ≥ 30 minutes
• S2: Deformability ≥ 5 mm
• High coverage (up to 30 % higher coverage than standard Sopro thin-bed adhesives)
• Stress-relieving and impact-sound-insulating effect
• For large-format units
• Highly flexible
• Low-chromate to Regulation (EC) No 1907/2006, Annex XVII