Product data sheets
-
Technical data sheet Sopro RAM 3 454
-
Environmental product declaration (EPD) - Sopro RAM 3® 454
-
Safety data sheet Sopro RAM 3 454
-
Declaration of performance Sopro RAM 3 454
Product Description
Universal, sag-resistant, rapid-set, fibre-reinforced, cementitious render and filler classed under mortar group MG III to DIN 1053 – 1. For rapid smoothing, patching and rendering of mineral substrates, e.g. concrete and masonry. With excellent workability and mouldability properties. Ideal for renovation and refurbishment. Suitable as plinth render, for formation of angle fillets and to create falls, for use in damp and wet spaces, and on balconies, patios and steps/stairways. Rapid strength development allows early working with plasterer‘s lattice plane.
- For walls, floors and ceilings, indoors and outdoors
- Coat thickness: 3 – 60 mm for single, full-surface application
- Excellent sag resistance, even with greater coat thicknesses
- Excellent mouldability
- Very smooth, easy workability
- Suitable for levelling coats laid to falls
- For rapid progress on site
- Also easy to apply by plastering machine
- Working life: approx. 20 minutes
- Walkable: after approx. 1.5 hours
- Ready to receive ceramic covering: after approx. 2 hours
- Compressive strength: ≥ 20 N/mm²
- Meets DIN EN 998-1 requirements, strength class CS IV
- Formation of angle fillets: Low capillary absorption to DIN EN 1062-1
- Reaction to fire: A1/A1fl
- Low-chromate to Regulation (EC) No 1907/2006, Annex XVII
- DGNB: Top quality level 4, Line 8
- For healthy living: Recommended by Sentinel Haus Institut
Up to 60 mm
Delivery forms & order numbers
Item no. | Packaging | pcs/pal. | kg/pal. |
7745425 | Bag 25 kg | 40 | 1,000 kg |
7745405 | Bag 5 kg | 200 | 1,000 kg |
Test certificates
- Test certificates, test reports and classifications are available upon request
Consumption
Approx. 1.6 kg / m² / mm;
as angle fillet approx. 0.4 – 0.5 kg / m