-
-
AFS 561
Anhydrite floor-levelling compound
White, pumpable, flow-applied, self-levelling, rapid-set, alpha-hemihydrate-based filler used to level out gypsum-based/calcium sulphate-based (anhydrite and self-levelling anhydrite)
-
-
-
-
BDL 661
Bitumen roof paint
Ready-to-use, rapid-drying proofing and protective coating for old and new bitumen roofing felt, bitumen shingles, mineral roof coverings, wood and metal roofing and old bitumen coatings.
-
-
-
-
BDR 1175
Butyl sealing and repair tape 75 mm wide
Universal, self-adhesive butyl sealing and repair tape for fast, trouble-free bridging of perimeter and movement joints, and for waterproofing cracks and defects, e.g. in rainwater gutters, downpipes, chimneys or roof windows.
-
-
-
BH 869
Construction resin
Two-component epoxy-resin-based construction resin. As primer and adhesion promoter on all smooth substrates. For production of highly wear-resistant and chemically-resistant mortars on concrete floors and cement screeds.
-
-
-
-
BIS 766
Bitumen filler
Used for waterproofing structures in contact with ground (to AIB) to provide barrier against ground moisture and non-accumulating seepage water.
-
-
-
-
BK 544
Adhesion promoter and suction-control coat
High-alkali-resistant synthetic dispersion mixed with quartz sand for pretreatment of indoor mineral substrates, especially concrete, which are unsuitable for direct application of gypsum plasters due to their low suction, smoothness and density.
-
-
-
-
BKK 660
Cold-applied bitumen adhesive
Ready-to-use cold-applied bitumen adhesive for bonding bitumen roof sheet membranes and waterproofing old and new bitumen roofing felt.
-
-
-
-
BLS 689
Drill hole grout
Solvent-free, one-component damp-proofing concentrate based on special silicates and water-repellent additives.
-
-
-
BS 467
Concrete filler
Fine-aggregate, grey, rapid-set, sag-resistant, cementitious filler for smoothing, patching and coating fair-faced concrete, precast concrete and cement render wall and ceiling surfaces and for stopping fine cracks and pores in concrete surfaces.
-
-
-
BSO 762
Biological mould oil
Solvent-free, biodegradable concrete release agent for absorbent, non-absorbent and smooth formwork types for production of fair-faced concrete and smooth or textured wall and floor slab units.
-
-